Replacement Patio Door Rollers
Patio Door Rollers – If the patio door is more difficult to open day by day, it is necessary to change the patio door rollers. These rollers can last up to 15 years, but they wear out and therefore must be replaced. Most sliding patio doors are made of aluminum, but there are such doors made of wood or vinyl. They have ball bearing rollers to slide on. The wooden doors will have to adjust the screws on the bottom, so you should check before you take the exit door and replace the rollers. Slide a screwdriver under the door and lift the weight of the roller. Check if the door works better now. If the door does not have all the screws, or that is not present, you must remove the door carefully and with the help of another person.
Aluminum and vinyl patio doors have a single screw to mount both the patio door rollers and adjust it. It can be adjusted without taking the door from its place. Patio vinyl doors disappear more than other types of doors. They can also be stuck in the place that does not allow them to leave with the same ease. Be careful when handling a door, as they can detach easily.
When you reach the bottom of the patio door, fix it by removing a screw or bend the metal tab and reassemble the whole thing again as it was. Cover the roller that holds the screws with cork or rubber. Replace the door down and reinstall the screws, and then adjust the rollers and align the door in the frame. Align the door lock with the adjusted height of the door. Let’s see if the door is solved easily and if it does, your work to replace patio door rollers is done.