Ideas To Install Patio Sliding Doors
Patio sliding doors installed on your patio gives you easy access into the house from your backyard. Sliding glass doors are installed in a frame that has tracks running along the top and bottom. The door runs smoothly along the track using rollers installed at the bottom of the door. If you do not replace old doors, an opening for doors has been professionally installed before installing doors to ensure the structure is sound and the whole opening is self.
Remove the two brackets from the fixed side of the patio sliding doors, using a screwdriver to remove the screws. Lift the door so the lower wheels are lower traces, and pull on the bottom to remove the door. Does an assistant help you as the door becomes heavy? Remove the stitch from the old door frame using a hammer. Draw the threshold and pull the frame from the opening. Remove any rotten wood from the door frame, using a barbed iron.
Making patio sliding doors, cut a new piece of 2-inch by 6-inch table, using a saw, and put it in place of the rotten wood. Measure level 2-inch with 6 inch board and slide shims scrap wood pieces under 2-inch with 6 inch table where there is no plan. Sew the board down with a nail gun, and then cut the shim flush with that threshold, use a knife.